At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Synchroreceiver items like NSN 5990-00-251-6719. If you are interested in purchasing part number 11TR1427 by Ametek Technical And Industrial Products Inc, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number 11TR1427 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number 11TR1427 is produced by Ametek Technical And Industrial Products Inc under the CAGE Code 14404, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-251-6719 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-251-6719 Item PartTypeName: SYNCHRO,RECEIVER | 5990 | 002516719 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11TR1427 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.8610 INCHES MINIMUM AND 1.8910 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1190 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.2410 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 25.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 920.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 14.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 1100.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 406.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6000.0 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6200 INCHES NOMINAL |
| ALNF | SHAFT HOLE DIAMETER | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 4800.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 43.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.1150 INCHES NOMINAL SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 500.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,HOLLOWED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0900 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.103 STATOR TO ROTOR NOMINAL |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES NOMINAL |
| CWAC | SHAFT TAPER LENGTH | 0.0550 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote