At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Synchro Differential Transmitter items like NSN 5990-00-924-3939. If you are interested in purchasing part number X40-201-972 by Bae Systems Bofors Ab, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number X40-201-972 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number X40-201-972 is produced by Bae Systems Bofors Ab under the CAGE Code S3712, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-924-3939 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-924-3939 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 009243939 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11CDX4B | 1 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.4130 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9370 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 49.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 530.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 1590.00 MINIMUM AND 2050.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.00 MINIMUM AND 85.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 470.00 MINIMUM AND 570.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 23.00 MINIMUM AND 33.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.070 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8510 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1900 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.1900 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MILS20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote