At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Resolver Electrical items like NSN 5990-00-824-0236. If you are interested in purchasing part number 11RC40 by Chicago Dynamic Industries Inc, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number 11RC40 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number 11RC40 is produced by Chicago Dynamic Industries Inc under the CAGE Code 10984, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-824-0236 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-824-0236 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 008240236 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VRW114CB62 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABHP | OVERALL LENGTH | 3.0320 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| AJSL | BODY SIZE | 11 |
| AJSP | STATOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 380.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJTY | ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJVE | COMPENSATOR RESONANT FREQUENCY IN HERTZ | 600.0 |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0620 INCHES NOMINAL |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CWFM | SHAFT FLATTED PORTION LENGTH | 0.9100 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM SINGLE SHAFT AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.9700 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 160.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 240.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1570.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE SHAFT |
| CTJK | SHAFT FLATTED PORTION THICKNESS | 0.1050 INCHES NOMINAL SINGLE SHAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote