At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Resistor Variable Wire Wound Pre items like NSN 5905-00-836-6081. If you are interested in purchasing part number 20871 by General Dynamics Global Imaging, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number 20871 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number 20871 is produced by General Dynamics Global Imaging under the CAGE Code 10112, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5905-00-836-6081 or similar parts, we invite you to check out our page of 5905 Resistors products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-836-6081 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008366081 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 20871 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.0300 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.438 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.812 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABHP | OVERALL LENGTH | 1.078 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.030 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.093 INCHES NOMINAL |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.600 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0930 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/1.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote