Request a Quote for Part Number M20708/500-001 with the NSN 5990-00-110-9441 by General Dynamics Global Imaging!

Part Number: M20708/500-001

Alternate P/N: M20708500001

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-110-9441

NIIN: 001109441

Item Name : Synchroreceiver

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Synchroreceiver items like NSN 5990-00-110-9441. If you are interested in purchasing part number M20708/500-001 by General Dynamics Global Imaging, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number M20708/500-001 that caters to your particular situation.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Part number M20708/500-001 is produced by General Dynamics Global Imaging under the CAGE Code 10112, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-110-9441 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.

NSN Information for Part Number M20708/500-001 with NSN 5990-00-110-9441, 5990001109441

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-110-9441 Item PartTypeName: SYNCHRO,RECEIVER	5990	001109441	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MIL-S-20708/500	2	9	5

Characteristics Data of NSN 5990-00-110-9441, 5990001109441

MRC	Criteria	Characteristic
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2400 INCHES MAXIMUM
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0250 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.0625 INCHES MAXIMUM
CSJY	TRANSFORMATION RATIO	0.454 ROTOR TO STATOR NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6750 INCHES MINIMUM AND 0.6810 INCHES MAXIMUM
TEST	TEST DATA DOCUMENT	81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-S-20708/50 GOVERNMENT SPECIFICATION
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.5460 INCHES MINIMUM AND 1.5760 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	0.9360 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0620 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.8400 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3060 INCHES MINIMUM AND 0.3360 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AHCG	MAXIMUM TEMP RISE	20.0 DEG CELSIUS
AJSL	BODY SIZE	10
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	142.0 MILLIAMPERES MAXIMUM
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	620.0 MILLIWATTS NOMINAL
AJTN	ZSS IMPEDANCE MAGNITUDE IN OHMS	11.00 NOMINAL
AJTP	ZSS IMPEDANCE ANGLE IN DEG	15.000 NOMINAL
AJTQ	ZSO-90 IMPEDANCE MAGNITUDE IN OHMS	15.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	7.500 INPUT TO OUTPUT MAXIMUM
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-60.0 TO 60.0
AJVN	RECEIVER ERROR ANGULAR RANGE IN MINUTES	-60.0 TO 60.0
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	2200.0 MILLIMETER-MILLIGRAMS NOMINAL
AJVW	ALIGNMENT HOLE QUANTITY	3
AJWQ	PILOT LENGTH	0.0380 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL