At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Resolver Electrical items like NSN 5990-00-826-0991. If you are interested in purchasing part number 0D10379 by General Dynamics Global Imaging, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number 0D10379 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number 0D10379 is produced by General Dynamics Global Imaging under the CAGE Code 10112, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-826-0991 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-826-0991 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 008260991 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 0D10379 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | ALUMINUM ALLOY OR STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.4370 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0830 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1873 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5310 INCHES NOMINAL SINGLE SHAFT |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.985 ROTOR TO COMPENSATOR NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2.00 INCH-OUNCES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION J AND CONNECTION R2 POSITION G AND CONNECTION R3 POSITION E AND CONNECTION R4 POSITION J AND CONNECTION S1 POSITION B AND CONNECTION S2 POSITION C AND CONNECTION S3 POSITION A AND CONNECTION S4 POSITION D AND |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0630 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR,2 STATOR,2 COMPENSATOR,2 RESISTOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 45.0 MILLIAMPERES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 150.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/5.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1/0.1 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0/5.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0005 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote