At Spares Universe,we provide safe, durable, and affordable NSN part fulfillment solutions for customers within a wide variety of industries. This includes our selection of dependable Synchro Control Transformer items like NSN 5990-00-884-1743. If you are interested in purchasing part number 0D10537 by General Dynamics Global Imaging, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you provide in your form, including shipping deadlines, desired quantities, and more, we will find a solution for sourcing part number 0D10537 that caters to your particular situation.
Note : We Will Not Share Your Information To Any Third Parties.
Part number 0D10537 is produced by General Dynamics Global Imaging under the CAGE Code 10112, and this manufacturer is a trusted entity on our Approved Vendor List (AVL) who follows a strict level of quality assurance in their practices. They are also part of our vast supply network which allows for expedited shipping solutions for domestic and international customers alike. If you would like to explore other products with the NSN 5990-00-884-1743 or similar parts, we invite you to check out our page of 5990 Synchros and Resolvers products or look at the list of related items below.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-884-1743 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008841743 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A25A209-006-101 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2492 INCHES MINIMUM SINGLE SHAFT AND 0.2497 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 45.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 MAXIMUM |
| AJSP | STATOR INPUT CURRENT RATING | 7.7 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 80.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 10.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 2.1345 INCHES MINIMUM AND 2.1350 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.5710 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2970 INCHES MINIMUM AND 2.3000 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 2.2090 INCHES MINIMUM AND 2.2150 INCHES MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 1495.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 675.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -1.0/1.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 0.8370 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 11870.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 741.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote